Attic Spray Foam Insulation Greenville, TX 75401 | Mckinney Spray Foam Insulation

Spray Foam Insulation in Greenville, TX (75401) · Local Professionals

Mckinney Spray Foam Insulation · Fast response in Greenville and the McKinney area · Free estimate 24h

✅ Written Estimates with R-Value & Thickness Specs 🛡️ Fully Insured 💸 Free Quote 24h 🕐 Mon-Sat 7am-6pm

+29Verified Reviews

14Years in Business

4.9 ★Google Rating

24/7Available

Greenville's older homes and Hunt County farms sit in a climate where summer heat bakes metal roofs and attics, winter moisture condenses on cold steel, and the black clay soil underneath shifts with the seasons. If you own one of the vintage Victorians near the downtown square, a 1970s ranch on the east side, or a metal barn out on acreage, you know the problem: an attic that hits 140 degrees by mid-afternoon, a garage or shop that drips condensation on cold mornings, or insulation that has compressed, molded or been fouled by rodents and now has to come out before anything new goes in.

Mckinney Spray Foam Insulation has been serving Greenville (75401) and the surrounding Hunt County area since 2012. We handle the jobs that matter: removing failed insulation and replacing it with spray foam that seals, insulates and stays put, air sealing the rim joists and band joists that let conditioned air escape, and spraying metal buildings and barndominiums where traditional batts and blown-in simply will not perform in the heat and humidity.

Spray Foam Insulation in Greenville (75401)

Greenville's building stock runs the full range. The historic downtown and older neighborhoods carry 1880s through 1930s homes on pier-and-beam foundations with plank walls and low attics that were never insulated to modern standards. The 1970s and 1980s brick ranches have shallow attics with ductwork routed through them, low-slope roofs that collect heat, and closed wall cavities with little or no insulation. Out toward the county, metal shops, pole barns, horse barns and RV garages bake in July and sweat condensation on their underside when the temperature drops. Every one of these building types faces the same core problem: heat that will not stay out in summer, cold that will not stay in during winter, and moisture that condenses on cold surfaces or gets trapped in saturated insulation.

Spray foam solves these problems because it seals and insulates at the same time. Unlike blown-in or batts, foam expands to fill every crack, every corner and every gap. It does not settle, compress or lose R-value over time. In a vented attic with ductwork running through it, closed-cell foam on the underside of the roof deck keeps the attic cold and the ducts efficient. In a closed wall cavity, injection foam reaches spaces that no other insulation can fill. In a metal building, foam on the interior face of the roof and walls stops the condensation and holds the heat in winter. We have been doing this work in Hunt County for over a decade, and we know the buildings and the climate.

Our services in Greenville

Attic Spray Foam Insulation in Greenville · Open-cell foam on the roof deck turns a 150°F McKinney attic into conditioned…
Closed Cell Spray Foam Insulation in Greenville · Two-pound closed-cell foam delivers R-6.5 per inch with its own vapor retarder…
Open Cell Spray Foam Insulation in Greenville · Half-pound open-cell foam air-seals attics and walls at a friendlier price per…
Wall & Injection Foam Insulation in Greenville · Injection foam fills closed walls through small drilled ports, no demolition.
Crawl Space Spray Foam Insulation in Greenville · Closed-cell foam on pier-and-beam subfloors stops cold floors in a freeze and…
Rim Joist & Band Joist Spray Foam in Greenville · Band joists; cantilevers and bonus-room floors over garages leak conditioned…
Garage Spray Foam Insulation in Greenville · Garage ceilings under bonus rooms and walls shared with the house are…
Metal Building & Barndominium Spray Foam in Greenville · Closed-cell foam is the insulation that stops a Texas metal building from…
Commercial & New Construction Spray Foam in Greenville · Warehouses; offices; churches and production builders served on schedule.
Insulation Removal in Greenville · Old blown-in and batts vacuumed out before any new foam goes in, never buried.
Insulation Replacement & Re-Insulation in Greenville · The full reset: old material removed; gaps air-sealed…
Air Sealing in Greenville · Top plates; can lights; chases and attic hatches leak more cooled air than most…

How a Job Works in Greenville

We start with a free on-site assessment. You show us the space, tell us what you are trying to fix (a hot attic, a damp crawl space, a cold garage, a sweating metal building), and we walk through and measure. We look at what is already there, what has to come out, what access looks like, and what the local code requires. We leave you with a written estimate that includes the R-value, the thickness we will spray, the cost, and a timeline.

When we show up to do the work, our crew sets up mechanical ventilation if we are spraying indoors. We spray to the thickness and R-value in the estimate, using the manufacturer ratio and drum temperature, and we let the foam cure under ventilation for the full time the product requires. If insulation has to come out first (compressed batts, rodent-fouled material, or failed foam from a previous job), we remove it and haul it away. If a substrate is wet, moldy or leaking, we stop and tell you straight: we fix the moisture first or we walk away.

When the foam is cured and hard, we clean up, do a final walkthrough with you, and answer any questions about what you are seeing and how to maintain it. Your property is left clean.

Pricing for spray foam in Greenville depends on what you are spraying, how much area you have, what R-value and thickness you need, and what has to be removed or fixed first. An attic foam job on a single-story ranch typically runs from $1.50 per square foot for open-cell to $1.20 per board foot for closed-cell, depending on thickness and coverage. Wall injection foam in a closed cavity runs from $2 per square foot. A crawl space starts around $2,500 and goes up with size and moisture work. Insulation removal runs from $950. If you have a metal building or barndominium, we charge from $1.75 per square foot. The most honest way to know what your job costs is to call us at (469) 247-0288 for a free estimate. We will measure on site, specify the R-value and thickness, and give you a firm number before we start.

✅ Written Estimates with R-Value & Thickness Specs, fully insured for work in Greenville and nearby areas.

I have an older ranch house on the east side of Greenville with a low attic and ductwork running through it. The upstairs bedroom never cools, and the AC bill is out of control. Will spray foam on the roof deck help?

Yes, it will. If your AC handler and ducts are in a vented attic, that attic is hitting 140 degrees or higher by mid-afternoon in summer. Closed-cell foam sprayed on the underside of the roof deck brings the attic temperature down, keeps your ducts in conditioned space, and makes the AC work far less hard. You will feel the difference in comfort and in your bill. Call us at (469) 247-0288 and we will walk through it.

I own a metal building out on acreage near Greenville, and there is condensation dripping off the inside of the roof in winter and early spring. What causes it, and can spray foam stop it?

Condensation on the underside of a metal roof happens when warm, moist air inside the building hits a cold metal surface. In a metal shop or barn, that moisture comes from equipment, animals, or just the outdoor air that gets in through cracks and gaps. Spray foam stops it by sealing those gaps and insulating the metal surface so it stays warm. The foam also prevents air infiltration, which keeps the humid air from reaching the cold metal in the first place. If the building is very wet (standing water, high groundwater, or a leak), we fix the moisture source first. Otherwise, foam is the answer. Call (469) 247-0288 for a site visit.

How much does it cost to spray foam an attic in Greenville, and what factors change the price?

Attic foam starts at $1.50 per square foot for open-cell and $1.20 per board foot for closed-cell. The final price depends on the square footage of the roof deck, the R-value and thickness you want (which depend on your climate zone and your goals), whether you are spraying over existing insulation or removing it first, and how easy access is. A tight attic with difficult access costs more. Insulation removal adds to the job. We give you a written estimate with R-value, thickness and total cost before we start. Call (469) 247-0288.

Who decides what R-value and thickness I need in my Greenville home, and what does the building code say about ignition barriers and thermal barriers?

The energy code and building code in force at your address set the minimum R-value for attics, walls and crawl spaces. The building code also governs ignition barriers and thermal barriers on spray foam. These are local rules, and they vary by city. The building official in Greenville enforces them. We design our work to meet code, and we help you understand what applies at your address, but the City of Greenville and the building department have the final say. You can confirm the rules that apply to your property by contacting the City of Greenville website or calling the building department.

Can we stay in the house while you spray foam the attic, and how long before it is safe to go back upstairs?

Yes, you can stay in the house. We set up mechanical ventilation during the spray and cure, which pulls fumes out of the building and exhausts them outside. The smell of uncured foam is strong, and some people find it irritating, so we recommend opening windows in other parts of the house and staying out of the immediate work area during and for a few hours after spraying. The foam is fully cured and safe to re-enter in 24 to 48 hours, depending on the product and temperature. We will tell you the exact re-entry window for your job.

Are you fully insured, and what happens if something goes wrong during the work?

Yes, we are fully insured. We carry general liability insurance and workers' compensation coverage. If any damage occurs during the work, our insurance covers it. Before we start, we will walk you through what to expect, answer your questions, and make sure you are comfortable with the plan. Our job is to do the work right the first time and leave you with a clean property and a solid installation.

I live out on a property near Greenville with an old metal barn that needs insulation. Is summer the best time to spray foam, or should I wait until fall?

Summer is actually the worst time to spray foam outdoors in Greenville. The heat and humidity slow the cure, and if the substrate is too hot, the foam can off-gas and not set properly. Fall and spring are ideal: the temperatures are moderate, humidity is lower, and the foam cures reliably. Winter can work if we protect the job from rain and cold, but it takes longer. If your barn is dripping condensation in winter and spring, that is the signal that the job is urgent, and we can schedule it for the next good weather window. Call (469) 247-0288 to talk through timing.