Attic Spray Foam Insulation Murphy, TX 75094 | Mckinney Spray Foam Insulation

Spray Foam Insulation in Murphy, TX (75094) · Local Professionals

Mckinney Spray Foam Insulation · Fast response in Murphy and the McKinney area · Free estimate 24h

✅ Written Estimates with R-Value & Thickness Specs 🛡️ Fully Insured 💸 Free Quote 24h 🕐 Mon-Sat 7am-6pm

+29Verified Reviews

14Years in Business

4.9 ★Google Rating

24/7Available

Murphy, 75094, is built on two-story brick homes from the 2000s onward, most with vaulted great rooms, steep composition-shingle roofs, and big attics that sit in the Texas sun all afternoon. These homes were designed for air conditioning, and that AC handler and ductwork lives in an attic that hits 140 degrees by mid-July, burning energy to cool a house below while the attic itself becomes an oven. Mckinney Spray Foam Insulation has been sealing and insulating those attics, walls, and crawl spaces since 2012, and we know exactly what Murphy's building stock needs.

When your upstairs bedrooms stay hot, your summer electric bill climbs past what it should be, or you find condensation dripping in a crawl space or metal building, a Murphy homeowner calls us because we show up local, we measure the job right, and we explain what will actually work without the sales pitch.

Spray Foam Insulation in Murphy (75094)

Murphy's newer subdivisions and master-planned communities hold homes built to code, but code insulation in a vaulted attic with ductwork running through it is not enough when outdoor temperatures push past 100 degrees for weeks and the attic itself becomes a radiant heat source. Open-cell spray foam on the roof deck seals air leaks that blown-in insulation cannot reach, stops the ductwork from losing conditioned air into unconditioned space, and keeps that west-facing attic from radiating heat back down into the living space below. Closed-cell foam is stronger, adds vapor control, and is the choice for rim joists, band joists, and crawl spaces where moisture or structural support matters. Wall injection foam fills cavities in 2000s brick construction that have no insulation at all, and it does the work without tearing into the drywall.

We have served Murphy and the McKinney area since 2012. We measure every job on site, specify R-value and thickness in writing, and we do not spray foam over wet substrate, failed insulation, or moisture problems we have not fixed first. That honesty is the difference between a job that works and a job that smells and never cures.

Our services in Murphy

Attic Spray Foam Insulation in Murphy · Open-cell foam on the roof deck turns a 150°F McKinney attic into conditioned…
Closed Cell Spray Foam Insulation in Murphy · Two-pound closed-cell foam delivers R-6.5 per inch with its own vapor retarder…
Open Cell Spray Foam Insulation in Murphy · Half-pound open-cell foam air-seals attics and walls at a friendlier price per…
Wall & Injection Foam Insulation in Murphy · Injection foam fills closed walls through small drilled ports, no demolition.
Crawl Space Spray Foam Insulation in Murphy · Closed-cell foam on pier-and-beam subfloors stops cold floors in a freeze and…
Rim Joist & Band Joist Spray Foam in Murphy · Band joists; cantilevers and bonus-room floors over garages leak conditioned…
Garage Spray Foam Insulation in Murphy · Garage ceilings under bonus rooms and walls shared with the house are…
Metal Building & Barndominium Spray Foam in Murphy · Closed-cell foam is the insulation that stops a Texas metal building from…
Commercial & New Construction Spray Foam in Murphy · Warehouses; offices; churches and production builders served on schedule.
Insulation Removal in Murphy · Old blown-in and batts vacuumed out before any new foam goes in, never buried.
Insulation Replacement & Re-Insulation in Murphy · The full reset: old material removed; gaps air-sealed…
Air Sealing in Murphy · Top plates; can lights; chases and attic hatches leak more cooled air than most…

How a Job Works in Murphy

We start with a free on-site assessment. You walk us through the problem: a hot upstairs, a high summer bill, condensation in the crawl space, or old insulation that has to come out. We look at the attic, the walls, the crawl space, and the ductwork layout. We measure the square footage, check for moisture, and we tell you what will work and what will not. No pressure, no estimate with blank R-values and no thickness spec.

When you are ready, our crew shows up and does the work right. If insulation has to come out first, we remove it and haul it away. We set up mechanical ventilation during the spray and cure period. We apply the foam at the manufacturer ratio and drum temperature, in controlled passes, to the thickness and R-value in your written estimate. For attic work in an occupied home, we observe a re-entry window of twenty-four to forty-eight hours before you and your family live in the space again. For wall injection or rim joist work, we coordinate around your schedule and any other trades on site.

When we finish, we clean up. Your property is left as we found it, minus the air leaks and the insulation problems.

Attic spray foam in Murphy runs from $1.50 per square foot for open-cell to $1.20 per board foot for closed-cell, depending on thickness and R-value. A typical Murphy attic of 1,200 to 1,500 square feet will fall into the $1,800 to $2,500 range for open-cell, more for closed-cell. Wall injection foam for a rim joist or band joist starts at $650. Crawl space foam starts at $2,500 and depends on the area and whether old insulation or standing moisture has to be dealt with first. Insulation removal runs from $950, and full insulation replacement including removal and new foam starts at $2,800. The real cost drivers are the square footage to cover, the R-value and thickness you need, whether you are using open or closed cell, and what has to be removed or fixed before any new foam goes in. We give you a free estimate at (469) 247-0288. We measure on site, we specify in writing, and we do not surprise you on the invoice.

✅ Written Estimates with R-Value & Thickness Specs, fully insured for work in Murphy and nearby areas.

I live in one of the newer neighborhoods near Stonebridge Ranch or Trinity Falls. My upstairs bedrooms are always hot in summer, even with the AC running. What is the problem?

Your attic is the problem. Those vaulted great rooms and bonus rooms over the garage mean the roof deck sits directly above the living space with no air gap. In July, that roof hits 140 degrees or more, and it radiates heat straight down through whatever insulation is there. If the insulation is blown-in fiberglass or cellulose, it does not stop air leaks around the ductwork, the electrical wiring, or the rim where the roof meets the wall. Spray foam on the underside of the roof deck seals all those leaks, stops the ductwork from losing cool air into the attic, and breaks the radiant heat path. The upstairs stays cooler, and your AC does not have to run as hard. Open-cell foam is the standard choice for roof decks in Murphy.

I found moisture dripping off the underside of my metal building or garage. The insulation is damp and compressed. Can you spray foam over it?

No. Damp, compressed, or moldy insulation has to come out first. Spray foam will trap the moisture underneath and the problem gets worse. We remove the bad insulation, we look for the source of the moisture (a roof leak, condensation from temperature swings, or a drainage problem), and we fix it or we walk away. Once the substrate is dry and sound, we spray the foam. That is the only way a job lasts. Call us at (469) 247-0288 and we will come look at it.

What does spray foam cost for a typical Murphy attic or crawl space?

An attic foam job in Murphy typically runs $1,800 to $2,500 for open-cell, depending on the square footage and R-value you need. A crawl space starts at $2,500. If old insulation has to come out first, add $950 to $1,500. Closed-cell foam costs more per board foot but covers thicker with less material. The best way to know is a free on-site estimate. Call (469) 247-0288 and we will measure your space and give you a written price with R-value and thickness spelled out.

Who decides what R-value and thickness I need in my Murphy home, and how do I know the job was done right?

The energy code and building code in force at your address set the minimum R-value. The building official in Murphy enforces it. We follow the code that applies to your home. When we give you a written estimate, we specify the R-value and the thickness in inches we will spray. That is your protection. After the job, the building official may inspect the foam thickness and density if a permit was pulled. The City of Murphy or the local building department can tell you what applies at your address and what inspection is required. You can also ask us to show you the thickness and density before we cover it up.

We live in the house. How long does the smell last, and when can we come back upstairs after you spray the attic?

Fresh spray foam has a chemical smell that is strongest in the first twenty-four to forty-eight hours. We set up mechanical ventilation during the spray and cure period to pull the smell out of the house. We open windows and we keep the space vented. Most of the smell is gone in forty-eight hours. We ask you to stay out of the attic and off the upper floor for the first twenty-four hours minimum, sometimes forty-eight hours depending on conditions. After that, the space is safe to occupy. The smell fades over the next few days. If you have a young child, a pregnant person, or anyone with respiratory sensitivity, tell us before we start and we will plan the work to minimize exposure.

Are you insured? What happens if something goes wrong during the job?

We are fully insured with general liability and workers' compensation. If damage occurs during the work, our insurance covers it. Before any job starts, we walk the property with you, we take photographs of existing conditions, and we document what is there. That protects both of us. If you have questions about our coverage or you want to verify our insurance, call us at (469) 247-0288.

When is the best time to do spray foam insulation in Murphy? Does summer heat or winter cold make a difference?

Spring and fall are ideal because the temperature is mild and we can ventilate during cure without opening your home to extreme heat or cold. Summer is possible but harder because the attic is already 140 degrees and ventilation can take longer. Winter works too, but it is slower. The real driver is not the season, it is the problem you are trying to solve. If your summer electric bill is out of control, spring or early summer is the best time to fix the attic before July heat hits. If you have a damp crawl space or a condensation problem, that can happen any time and should be fixed whenever you find it. Call (469) 247-0288 and we will tell you what makes sense for your situation.